Eddyfi Technologies

matPIMS (M-PIMS115 and M-PIMS35)

Source: sensornetworksinc.com (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.

Specifications

Vendor: Eddyfi Technologies
Brand / line: Sensor Networks (SNI) matPIMS
Category: Permanently installed UT
Class: Core integrity
Technique: Ultrasonic (15-element single-element array, 7.5 MHz)
Detects: wall losscorrosion rateerosion
Mounting: Epoxy-bonded permanent area monitor (1x15 linear or 3x5 matrix)
Temperature range: -20 to 65 C
Communications: Modbus
Power: Powered via wired Modbus RS-485 link
Suitable assets: pipingpipelinespressure vessels
Notes: Thickness range 0.125-6 in (3-150 mm); resolution 0.001 in. Two variants: M-PIMS115 (231.6 mm long) and M-PIMS35. Suited to buried pipelines and slurry lines.

3-Sci

Ultrasonic (low-profile sensors, 0.01 mm resolution)

wall losscorrosion rateerosion

WirelessHART, LoRaWAN, Cellular

Broadsens

4-channel parallel ultrasonic thickness; first-echo and echo-echo modes (coating ignored), accuracy to 0.001 mm

wall losscorrosion rate

Wired (other)

Broadsens

Ultrasonic (4-channel, single-element probes BUP4S; dual-element probes under development)

wall losscorrosion rateerosionbolt load

Proprietary wireless

Cosasco

Ultrasonic (dual-element; ultra-high-temp single element with foil/glycerin coupling)

wall losscorrosion rateerosion

WirelessHART

Cosasco

Ultrasonic (permanently attached smart sensors read by portable logger)

wall losscorrosion rateerosion

Wired (other)

Eddyfi Technologies

Ultrasonic (dual-element and delay-line, contact)

wall losscorrosion rateerosion

LoRaWAN, WirelessHART