Advanced Energy

Pulsar 4 / Pulsar 4 Advanced

Source: advancedenergy.com (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.

Specifications

Vendor: Advanced Energy
Brand / line: Mikron / E2T
Category: Thermal and furnace
Class: Core integrity
Technique: Two-wavelength infrared pyrometer reporting refractory, gas and integrated temperature
Detects: temperaturehot spots
Mounting: Fixed, sighted into sulfur reactor / high-temperature furnace
Temperature range: 350 to 2000 °C
Communications: Wired (other)4-20 mA/HART
Power: Integrated PSU 24 VDC / 120/230 VAC
Hazardous area: IECEx and ATEX II 2G Ex d IIB+H2 T4; FM/CSA Class I Div 1 Groups B, C, D T4; regional certs
Suitable assets: refractoryfurnace/heater tubes
Notes: HART Rev 7 (Advanced version only) and RS485; status listed Active. Mikron M90 and other E2T models not confirmed.

Advanced Energy

850 nm near-IR radiometric furnace thermal imager, 60 Hz

temperaturehot spots

Ethernet, Modbus

Advanced Energy

Short-wavelength (750-1100 nm) thermal imager, 640x480, 60 Hz

temperaturehot spots

Ethernet, Modbus

AMETEK

LWIR-640 radiometric imaging of flare flame and pilot, 100 to 1000 °C range, with alarm thresholds in IMAGEPro V2

temperaturegas releaseother

Ethernet

AMETEK

LWIR-640 thermal imager (8 to 14 µm, 640x480) in Ex d flameproof stainless housing with germanium window

temperaturehot spots

Ethernet

AMETEK

Long-wave infrared (8 to 14 µm) radiometric thermal imager, 640x480, up to 60 Hz, integrated web server

temperaturehot spots

Ethernet

AMETEK

Mid-wave infrared thermal imager (3.9 µm filtered or 3 to 5 µm broadband), 640x480, up to 60 Hz, imaging through smoke or particulates

temperaturehot spots

Ethernet