AMETEK

EXSH1 EX LWIR (LWIR-640 in flameproof housing)

Source: ametek-land.com (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.

Specifications

Vendor: AMETEK
Brand / line: AMETEK Land
Category: Thermal and furnace
Class: Adjacent
Technique: LWIR-640 thermal imager (8 to 14 µm, 640x480) in Ex d flameproof stainless housing with germanium window
Detects: temperaturehot spots
Mounting: Fixed, 316/316L stainless steel housing, no purge air required, gridless window, optional air or water cooling
Temperature range: LWIR-640 ranges: -20 to 120, 0 to 500, 100 to 1000 °C; housing ambient -40 to +70 °C certified (to +160 °C Zone 2/22 with water cooling)
Communications: Ethernet
Power: 19 to 26.4 Vdc, 2.3 A max
Hazardous area: ATEX/IECEx/UKEX Zones 1/21: II 2 (1) G D Ex db [op is Ga] IIC T6 Gb; Zones 2/22: II 3 (1) G D Ex db ... Gc; IP66/IP68
Suitable assets: furnace/heater tubesrefractoryflarepressure vessels
Notes: Weight 20 kg max; Ø168 x 356 mm.

Advanced Energy

850 nm near-IR radiometric furnace thermal imager, 60 Hz

temperaturehot spots

Ethernet, Modbus

Advanced Energy

Short-wavelength (750-1100 nm) thermal imager, 640x480, 60 Hz

temperaturehot spots

Ethernet, Modbus

Advanced Energy

Two-wavelength infrared pyrometer reporting refractory, gas and integrated temperature

temperaturehot spots

Wired (other), 4-20 mA/HART

AMETEK

LWIR-640 radiometric imaging of flare flame and pilot, 100 to 1000 °C range, with alarm thresholds in IMAGEPro V2

temperaturegas releaseother

Ethernet

AMETEK

Long-wave infrared (8 to 14 µm) radiometric thermal imager, 640x480, up to 60 Hz, integrated web server

temperaturehot spots

Ethernet

AMETEK

Mid-wave infrared thermal imager (3.9 µm filtered or 3 to 5 µm broadband), 640x480, up to 60 Hz, imaging through smoke or particulates

temperaturehot spots

Ethernet