ClampOn

ClampOn Particle Monitor (DSP)

Source: clampon.com (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.

Specifications

Vendor: ClampOn
Brand / line: ClampOn DSP
Category: Sand and erosion monitoring
Class: Core integrity
Technique: Passive acoustics (ultrasonic) with onboard DSP; detects particle impacts at a pipe bend
Detects: sanderosion
Mounting: Clamp-on, non-intrusive, clamped to pipe surface in/after a 90 degree bend
Temperature range: -40 to 125 °C pipe surface (depending on configuration/certification)
Communications: Modbus4-20 mA/HARTWired (other)
Power: Max 2.2 W
Hazardous area: Ex ia and Ex d e versions
Suitable assets: pipingwellheads/flowlinespipelines
Notes: Min sand rate 0.01 g/s; min particle 25 micron (oil/water), 15 micron (gas); uncertainty +/-5% with sand-injection calibration; RS485 (ASCII, binary, Modbus RTU) and 4-20 mA; SS 316L housing, IP66/IP68. ClampOn AS is an independent Norwegian company.

ClampOn

Passive acoustics (ultrasonic), DSP III electronics

sanderosion

Proprietary wireless, Modbus

ClampOn

Active ultrasound, guided Lamb waves, EMAT transducers (CEMAT II)

wall losserosioncorrosion rate

Modbus, Ethernet, Wired (other)

ClampOn

Active ultrasound, guided Lamb waves, EMAT transducers

wall losserosioncorrosion rate

Ethernet, Modbus, OPC UA, Wired (other)

ClampOn

Passive acoustics (ultrasonic) with onboard DSP

sanderosion

Modbus, Wired (other)

Cosasco

Electrical resistance (metal-loss) erosion probe, rugged all-welded cylindrical element

erosionsand

Cosasco

Electrical resistance (metal-loss) erosion probe, angled element at 45 degrees to flow

erosionsand