ClampOn

ClampOn Subsea Corrosion-Erosion Monitor

Source: clampon.com (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.

Specifications

Vendor: ClampOn
Brand / line: ClampOn CEM
Category: Sand and erosion monitoring
Class: Core integrity
Technique: Active ultrasound, guided Lamb waves, EMAT transducers
Detects: wall losserosioncorrosion rate
Mounting: Non-intrusive, clamped to pipe exterior; ROV, diver or pre-installed models
Communications: EthernetModbusOPC UAWired (other)
Power: 18-32 VDC, or battery (stated 10-year battery life in standalone mode)
Suitable assets: subseapipelines
Notes: Three models (ROV, pre-installable, diver). SIIS Level 2/3 (Modbus TCP/IP), RS485 Modbus RTU, acoustic link; design depth 3050 m; wall 8-50 mm; min 4 inch NPS; design life 30 years (10+ ROV mounted).

ClampOn

Passive acoustics (ultrasonic), DSP III electronics

sanderosion

Proprietary wireless, Modbus

ClampOn

Active ultrasound, guided Lamb waves, EMAT transducers (CEMAT II)

wall losserosioncorrosion rate

Modbus, Ethernet, Wired (other)

ClampOn

Passive acoustics (ultrasonic) with onboard DSP; detects particle impacts at a pipe bend

sanderosion

Modbus, 4-20 mA/HART, Wired (other)

ClampOn

Passive acoustics (ultrasonic) with onboard DSP

sanderosion

Modbus, Wired (other)

Cosasco

Electrical resistance (metal-loss) erosion probe, rugged all-welded cylindrical element

erosionsand

Cosasco

Electrical resistance (metal-loss) erosion probe, angled element at 45 degrees to flow

erosionsand