3-Sci
Wi-Corr UT (single, Quad, Clamp and Bond)
Ultrasonic (low-profile sensors, 0.01 mm resolution)
Details for Wi-Corr UT (single, Quad, Clamp and Bond) →Sensorlink
UltraMonit® Retrofit
Request a quote Source: sensorlink.no
Source: sensorlink.no (accessed 2026-10-16). Confirm specifications with the manufacturer before ordering.
Specifications
- Vendor
- Sensorlink
- Brand / line
- UltraMonit
- Category
- Permanently installed UT
- Class
- Core integrity
- Technique
- Ultrasonic (pulse-echo transducers)
- Detects
- wall losscorrosion rateerosion
- Mounting
- Non-intrusive; subsea install, works through PE/3LPP/FBE coatings
- Communications
- Wired (other)
- Power
- Battery or cable powered
- Suitable assets
- subseapipelines
- Notes
- Greenfield/brownfield subsea retrofit, installed post pipe lay. Datasheet not fetched; specs not on page.
Related in Permanently installed UT
Broadsens
UT200S Multi-channel Ultrasonic Thickness Gauge
4-channel parallel ultrasonic thickness; first-echo and echo-echo modes (coating ignored), accuracy to 0.001 mm
Details for UT200S Multi-channel Ultrasonic Thickness Gauge →Broadsens
WUT204 (WUT204-S)
Ultrasonic (4-channel, single-element probes BUP4S; dual-element probes under development)
Details for WUT204 (WUT204-S) →Cosasco
Echo Point (EP-HSD high-sensitivity dual; EP-UHT ultra-high-temp single)
Ultrasonic (dual-element; ultra-high-temp single element with foil/glycerin coupling)
Details for Echo Point (EP-HSD high-sensitivity dual; EP-UHT ultra-high-temp single) →Cosasco
Ultracorr (Non-Intrusive Underground Pipe Thickness Monitor)
Ultrasonic (permanently attached smart sensors read by portable logger)
Details for Ultracorr (Non-Intrusive Underground Pipe Thickness Monitor) →Eddyfi Technologies
matPIMS (M-PIMS115 and M-PIMS35)
Ultrasonic (15-element single-element array, 7.5 MHz)
Details for matPIMS (M-PIMS115 and M-PIMS35) →