3-Sci
Wi-Corr UT (single, Quad, Clamp and Bond)
Ultrasonic (low-profile sensors, 0.01 mm resolution)
Details for Wi-Corr UT (single, Quad, Clamp and Bond) →321 products
3-Sci
Ultrasonic (low-profile sensors, 0.01 mm resolution)
Details for Wi-Corr UT (single, Quad, Clamp and Bond) →Broadsens
4-channel parallel ultrasonic thickness; first-echo and echo-echo modes (coating ignored), accuracy to 0.001 mm
Details for UT200S Multi-channel Ultrasonic Thickness Gauge →Broadsens
Ultrasonic (4-channel, single-element probes BUP4S; dual-element probes under development)
Details for WUT204 (WUT204-S) →Cosasco
Ultrasonic (dual-element; ultra-high-temp single element with foil/glycerin coupling)
Details for Echo Point (EP-HSD high-sensitivity dual; EP-UHT ultra-high-temp single) →Cosasco
Ultrasonic (permanently attached smart sensors read by portable logger)
Details for Ultracorr (Non-Intrusive Underground Pipe Thickness Monitor) →Eddyfi Technologies
Ultrasonic (15-element single-element array, 7.5 MHz)
Details for matPIMS (M-PIMS115 and M-PIMS35) →Eddyfi Technologies
Ultrasonic (dual-element and delay-line, contact)
Details for microPIMS →Eddyfi Technologies
Ultrasonic (dual-element up to 135 C / ultra-high-temp delay-line up to 500 C)
Details for smartPIMS 2.0 →Emerson
Ultrasonic (EMAT, through coatings, no couplant)
Details for Rosemount Wireless ET210 Corrosion and Erosion Transmitter →Emerson
Ultrasonic (EMAT, through coatings, no couplant)
Details for Rosemount Wireless ET310 Corrosion and Erosion Transmitter →Emerson
Ultrasonic thickness (no couplant); EMAT not stated on page
Details for Rosemount Wireless ET310C Corrosion and Erosion Transmitter →Emerson
Ultrasonic (EMAT, through coatings, no couplant)
Details for Rosemount Wireless ET410 Corrosion and Erosion Transmitter →Emerson
Ultrasonic (pulse-echo via high-temperature waveguide, no couplant)
Details for Rosemount Wireless WT210 Corrosion and Erosion Transmitter →Inductosense
Ultrasonic (passive, battery-free, inductively coupled, dry-coupled thin disc)
Details for WAND TM Sensor TMS-B5R (V4) →Inductosense
Ultrasonic (passive, battery-free, inductively coupled, dry-coupled thin disc)
Details for WAND TM Sensor TMS-B5R-H2 →Inductosense
Ultrasonic (passive, battery-free, inductively coupled, dry-coupled thin disc)
Details for WAND TM Sensor TMS-S5R (V7) →Inductosense
Ultrasonic (reads passive WAND TM sensors automatically)
Details for WAND-Online (WAND Remote Data Collector + X2000 gateway + iDART) →Ionix
Ultrasonic (single-element delay-line, 3.25 MHz)
Details for HotSense 380 →Ionix
Ultrasonic (dual-element, 5 MHz, through coatings)
Details for HotSense DE (dual element) →Ionix
Ultrasonic (single-element delay-line, 3.25 MHz)
Details for HotSense UHT (Ultrasonic High Temperature Transducer) →Metal Samples (Alabama Specialty Products)
Ultrasonic thickness; Thru-Coating, High-Sensitivity Dual (5 MHz) or Ultra-High-Temp single delay line (7 MHz); resolution 0.025 mm
Details for CorrSonic MS8000UT-HRT Wireless Ultrasonic Corrosion/Erosion Monitor →Metal Samples (Alabama Specialty Products)
Ultrasonic thickness; same three transducer options as single-channel
Details for CorrSonic MS800XUT-HRT Multi-Channel Wireless Ultrasonic Monitor (up to 4 sensors) →MISTRAS Group
Ultrasonic (permanently mounted single/dual crystal transducers)
Details for CALIPERAY Remote Thickness Tracker →Sensorlink
Ultrasonic (high-precision, non-intrusive)
Details for Swarm →Sensorlink
Ultrasonic (pulse-echo transducers)
Details for UltraMonit® PL →Sensorlink
Ultrasonic (pulse-echo transducers)
Details for UltraMonit® Retrofit →Sensorlink
Ultrasonic (pulse-echo transducers)
Details for UltraMonit® XT →SMS Integrity
Ultrasonic (installed, non-intrusive)
Details for Real-Time UT Wall Thickness Monitoring (RTUT) →Corr Instruments
Multielectrode array sensor (localised corrosion)
Details for NanoCorr Analyzers and CMAS Corrosion Probes →Cosasco
High-pressure access fitting for probe/coupon retrieval
Details for Buttweld Access Fitting Assembly Model 52 →Cosasco
Wireline-deployed downhole corrosion/temperature recorder
Details for Downhole Corrosion Monitoring System DCMS →Cosasco
Electrical resistance (ER) plus integrated temperature sensor
Details for Dual Sensor ER Temperature Probes →Cosasco
ER transmitter (two-wire)
Details for ER Corrosion Monitoring Transmitter ER-420 →Cosasco
ER remote data logger
Details for ER Data Logger E-210 (ER-210) →Cosasco
ER data logger with Bluetooth transfer to handheld TU-500
Details for ER Datalogger ER-200 →Cosasco
Electrical resistance (ER), flat strip flush element
Details for ER Fixed Flush Element Probe 2700/2705 →Cosasco
ER transmitter (two-wire)
Details for ER Two-Wire Transmitter ER-4020LT-A →Cosasco
Electrical resistance (ER), cylindrical welded element
Details for Fixed Process ER Probe 2500/2500HT →Cosasco
Electrical resistance (ER), all-welded cylindrical element, glass-to-metal seal
Details for Fixed Process ER Probe 2520/2520HT →Cosasco
Electrical resistance (ER) with measure, reference and check elements
Details for Heavy Duty Underground ER Probes 620HD/650 →Cosasco
Linear polarisation resistance, two electrodes, glass seal
Details for High Pressure LPR Probe 6080 →Cosasco
Retrieval tool for probes/coupons through access fittings
Details for HRSL Retriever Kit →Cosasco
Hydrogen pressure build-up in cavity (hydrogen flux)
Details for Hydrogen Probes 6400 →Cosasco
Corrosion management server integrating Microcor and LPR/pitting/galvanic transmitters
Details for Integrated Corrosion Monitoring System ICMS3 →Cosasco
LPR with electrochemical current noise (imbalance)
Details for LPR Continuous Corrosion Rate Transmitter 9020 →Cosasco
LPR with pitting, galvanic and potential/noise modes
Details for LPR Corrosion Rate Online Transmitter E9020 →Cosasco
LPR with electrochemical noise (pitting tendency) data logger
Details for LPR Datalogger LPR-200 →Cosasco
Linear polarisation resistance, two electrodes
Details for LPR Probe 6112 →Cosasco
Linear polarisation resistance, two electrodes
Details for LPR Probe 7012/7022 →Cosasco
Linear polarisation resistance, two electrodes
Details for LPR Probe 7212/7222 →Cosasco
Stand-alone Microcor data logger
Details for Microcor Data Logger (MWT-3905-MDL) →Cosasco
High-sensitivity electrical resistance (Microcor), 50-100x faster than standard ER
Details for Microcor High-Speed ER Corrosion Probes →Cosasco
Microcor high-resolution metal loss (ER-type) transmitter
Details for Microcor Wired Transmitter (MT-9485/MT-9485A) →Cosasco
Microcor high-resolution metal loss, 18-bit
Details for Microcor Wireless Transmitter (MWT) →Cosasco
Pressure-balanced retrieval tool with service valve
Details for RBSA Retriever Kit →Cosasco
Electrical resistance (ER), all-welded cylindrical element, glass-metal seal
Details for Retractable Element ER Probe 3520/3520HT →Cosasco
Electrical resistance (ER), tubular element
Details for Retractable ER Probe 3500/3500HT →Cosasco
Electrical resistance (ER), flat strip flush element
Details for Retractable Flush ER Probe 3700/3705 →Cosasco
Linear polarisation resistance, two electrodes
Details for Retractable LPR Probe 8012/8022 →Cosasco
Electrical resistance (ER), tubular element
Details for Retractable Small Diameter ER Probe 3504/3504HT →Cosasco
Retractor for retractable probes/injection devices
Details for Retractor Kit Model 60 →Cosasco
Electrical resistance (ER), flush element
Details for Retrievable Fixed and Adjustable ER Probe 4700/4700-ADJ →Cosasco
Electrical resistance (ER), flush element
Details for Retrievable Flush Element ER Probe 4705 →Cosasco
Electrical resistance (ER), rugged cylindrical element
Details for Retrievable Process ER Probe 4500 →Cosasco
Wireless Microcor ER monitoring system
Details for WirelessHART7 Wireless System (wireless high-speed ER monitoring) →Emerson
Wireless transmitter reading ER, LPR, galvanic, multi-element sand/erosion or combined probes (probes from most common vendors)
Details for Rosemount Wireless 4390 Series of Corrosion and Erosion Transmitters →Emerson
Field signature method (FSM), 48-pin matrix
Details for Roxar FSM Log 48 Area Corrosion Monitor →Emerson
Field Signature Method: injected current and electrode array (182 measuring electrodes) detect changes in electrical field pattern
Details for Roxar subsea FSM (Field Signature Method) →Honeywell
LFI (low-frequency impedance, LPR variant) + harmonic distortion analysis + electrochemical noise; outputs general corrosion rate, pitting factor, B value, CMI
Details for SmartCET CET5500 HART-wired Corrosion Transmitter →Honeywell
LFI/LPR + HDA + electrochemical noise
Details for SmartCET CET6000M-D Data Logger →Honeywell
LFI/LPR + HDA + electrochemical noise
Details for SmartCET CET6000M-W OneWireless Corrosion Transmitter →Metal Samples (Alabama Specialty Products)
Electrical resistance (ER), loop/cylindrical/flush elements
Details for ER Probe Range (ER0250, ER0500, ER3000-3200, ER4000-4210, ER6000-6200, ER7000-7220) →Metal Samples (Alabama Specialty Products)
Electrical resistance (ER)
Details for ER4100 Retractable ER Probe with Cylindrical Element →Metal Samples (Alabama Specialty Products)
Electrical resistance (ER)
Details for ER7100 Retrievable ER Probe with Cylindrical Element →Metal Samples (Alabama Specialty Products)
Electrical resistance (ER), flush element
Details for ER7210 Retrievable ER Probe with Large Flush Element →Metal Samples (Alabama Specialty Products)
Hydrogen permeation (pressure in sealed tube)
Details for HY4000 Retractable Hydrogen Probe →Metal Samples (Alabama Specialty Products)
Hydrogen permeation (sealed tube)
Details for HY7000 Retrievable Hydrogen Probe →Metal Samples (Alabama Specialty Products)
Hydrogen permeation (non-intrusive housing)
Details for HY7001 Direct Mount Hydrogen Probe →Metal Samples (Alabama Specialty Products)
Linear polarisation resistance, 2 or 3 electrodes
Details for LPR Probe Range (LP1000 to LP7300) →Metal Samples (Alabama Specialty Products)
Linear polarisation resistance transmitter
Details for MS2100L CorrTran AQUA / MS2801L / MS2900L CorrTran MV LPR Transmitters →Metal Samples (Alabama Specialty Products)
ER transmitter, 16-bit
Details for MS2600E/MS2601E 4-20 mA ER Transmitters →Metal Samples (Alabama Specialty Products)
ER transmitter, 20-bit ultra-high resolution
Details for MS2800E/MS2801E CorrVelox RS-485 Modbus ER Transmitters →Metal Samples (Alabama Specialty Products)
ER transmitter, 16-bit
Details for MS2900E/MS2901E Smart HART ER Transmitters →Metal Samples (Alabama Specialty Products)
Electrochemical (palladium foil) hydrogen penetration current
Details for MS3112 Hydrogen Penetration Monitoring System (patch probe) →Metal Samples (Alabama Specialty Products)
ER data logger (single and 2/4 channel)
Details for MS3500E / MS3502E / MS3504E / MS3600E ER Data Loggers →Metal Samples (Alabama Specialty Products)
LPR data logger
Details for MS3500L / MS3510L / MS3600L LPR Data Loggers →Metal Samples (Alabama Specialty Products)
Wireless ER transmitter
Details for MS5000E-ISA / MS5500E-ISA Wireless ER Transmitters →Metal Samples (Alabama Specialty Products)
Coupled multielectrode array sensor (localised corrosion)
Details for nanoCorr Coupled Multielectrode Sensor (CMS) →Metal Samples (Alabama Specialty Products)
Satellite telemetry for ER, LPR and sand probes (1-4 channels)
Details for Remote Corrosion Monitoring Telemetry System →Pyxis Lab
LPR plus electrochemical noise (localised corrosion index), conductivity compensation up to 10,000 uS/cm
Details for CR-Series Wireless and Inline LPR Corrosion Rate Sensors (CR-200, CR-300) →Teledyne Marine
CEION metal-loss technique (ER evolution), spark-eroded spiral or client pipeline-material element
Details for Subsea Corrosion Monitor (CM) and Corrosion Monitor with Pressure Temperature (CPT) →ClampOn
Passive acoustics (ultrasonic), DSP III electronics
Details for ClampOn BIRD Wireless Particle Monitor →ClampOn
Active ultrasound, guided Lamb waves, EMAT transducers (CEMAT II)
Details for ClampOn Corrosion-Erosion Monitor (topside CEM) →ClampOn
Passive acoustics (ultrasonic) with onboard DSP; detects particle impacts at a pipe bend
Details for ClampOn Particle Monitor (DSP) →ClampOn
Active ultrasound, guided Lamb waves, EMAT transducers
Details for ClampOn Subsea Corrosion-Erosion Monitor →ClampOn
Passive acoustics (ultrasonic) with onboard DSP
Details for ClampOn Subsea Particle Monitor →Cosasco
Electrical resistance (metal-loss) erosion probe, rugged all-welded cylindrical element
Details for Microcor S4500 High-Sensitivity Erosion Probe →Cosasco
Electrical resistance (metal-loss) erosion probe, angled element at 45 degrees to flow
Details for Microcor S4700 High-Sensitivity Erosion Probe →Cosasco
Intrusive sacrificial tube; breach exposes line pressure to a gauge
Details for Sand Probe Erosion Detection System →Emerson
Passive acoustic sensor with onboard digital signal processing; sand rate computed with velocity input
Details for Rosemount SAM42 Acoustic Particle Monitor →Metal Samples (Alabama Specialty Products)
Intrusive sacrificial thin-wall tube; breach pressurises a gauge/pressure sensor alarm
Details for Model SP7000 Sand Probe →Teledyne Marine
Intrusive sacrificial-element metal-loss sensor (CEION, spark-eroded spiral Inconel 625 element), 45 nm resolution
Details for Subsea Erosion Sensor (SE10/SE15 and SEPT10/SEPT15 series) →Kistler
Piezotron AE sensor with built-in impedance converter
Details for Acoustic emission sensor 8152C (Piezotron) →MISTRAS Group
Wireless/PoE acoustic emission SHM node with system-on-a-chip
Details for DaisAE →MISTRAS Group
Standalone AE system on a chip
Details for Micro-SHM →MISTRAS Group
Resonant piezoelectric AE sensor, 50-400 kHz
Details for R15a 150 kHz General Purpose AE Sensor →MISTRAS Group
32-channel AE system in weatherproof outdoor enclosure with feature extraction and waveform processing
Details for Sensor Highway III →QAWRUMS
IoT acoustic emission node, single channel, up to 2 MS/s
Details for RAEM1 →QAWRUMS
Synchronized 2-6 channel AE unit, testing plus long-term monitoring, 2 MS/s per channel
Details for RAEM1-6 →QAWRUMS
Battery-powered single-channel IoT AE node for condition monitoring
Details for RAEM2 →Vallen Systeme
Acoustic emission, multi-channel digital (40 MHz, 18-bit), online and offline analysis
Details for AMSY-6 →Vallen Systeme
Acoustic emission sensor with integral 20 dB preamplifier
Details for ISAS3 intrinsically safe AE sensors (ISAS3-030/075/150/375/900) →Vallen Systeme
Acoustic emission, 2-channel, 10 MHz sampling, networked
Details for linWave 1002 →Vallen Systeme
Acoustic emission SHM with smart-preamp sensor; CAN bus for strain/temperature inputs; cloud analysis and alarms
Details for Turnkey Solutions for SHM (SHM-MP1 sensor + AMSY-6 cabinet) →3-Sci
Embedded humidity (0.1% RH) and temperature (0.1 °C) sensing for localised measurement within about 2 m
Details for Wi-Corr CUI Proximity sensor →3-Sci
Radio-wave transmission along the pipe (pipe acts as sensing cable) to detect moisture between sensor pairs, 10 ppm sensitivity
Details for Wi-Corr CUI Quanta sensor →Chemelex
Conductive-polymer water-sensing cable; detects and locates water (+/-1 m) via TraceTek SIM and alarm modules
Details for TraceTek TT1100-OHP-THIN Water Sensing Cable for insulated pipe →CorrosionRADAR
Electromagnetic guided radar (EMGR) sensing cable under insulation, corrosion and moisture sensor types
Details for CR:LR long-range CUI sensors (corrosion and moisture) with IoT CR Node →CorrosionRADAR
Short-range electromagnetic radar-based CUI sensing (corrosivity, moisture, humidity, temperature)
Details for CR:SR short-range CUI sensor →Guided Ultrasonics Ltd
Permanently installed guided wave (long-range UT) high-temperature ring, plus local thickness monitoring
Details for gPIMS HT Sensors (EFC and EX, 16-channel) →Guided Ultrasonics Ltd
Permanently installed guided wave (long-range UT) piezoelectric ring, plus local thickness monitoring under the sensor
Details for gPIMS Sensor rings (EFC and EX, 16-channel) →Indusenz
Relative humidity and temperature sensing directly under insulation
Details for INVENIO RH-2 sensor (with INVENIO GW-1 gateway) →iSensPro
Wireless sensor for moisture and corrosion under insulation with continuous circumferential monitoring
Details for ATEX-certified Moisture and Corrosion Sensor (CUI) →Metal Samples (Alabama Specialty Products)
Electrical resistance (ER), flush-mount element under insulation
Details for ER0600 Corrosion Under Insulation (CUI) Probe →TE Connectivity
Capacitive relative humidity and temperature sensing with logger and radio
Details for 59xxN LoRaWAN wireless humidity/temperature sensors (55xxN is the Bluetooth version) →AP Sensing
Raman DTS with code-correlation, single APD receiver
Details for DTS N45-Series →AP Sensing
Raman DTS-based linear heat detection, SIL-2 rated
Details for LHD N45-Series (Linear Heat Detection) →Bandweaver
Distributed temperature sensing for fire/hot-spot detection
Details for FireLaser DTS →Bandweaver
Distributed acoustic sensing
Details for Horizon DAS →Bandweaver
Long-range distributed temperature sensing
Details for T-Laser DTS →Eddyfi Technologies
ACFM array probe with Seatooth subsea wireless communications
Details for SEATOOTH ACFM →Febus Optics
Rayleigh phase-based DAS at 1550 nm, 1/2/4 channels, 0.4 m min channel spacing
Details for A1-NEO DAS →Febus Optics
Distributed acoustic sensing (phase-sensitive OTDR)
Details for FEBUS A1 (DAS) →Febus Optics
Brillouin distributed strain and temperature sensing
Details for FEBUS G1-R (DSS / DTS) →Febus Optics
Brillouin distributed dynamic temperature and strain
Details for G1-D Dynamic DTS/DSS →Febus Optics
Brillouin distributed temperature and strain sensing
Details for G2-R DTS/DSS →Febus Optics
Raman distributed temperature sensing
Details for T1-PLUTON DTS →Fotech
DAS with NVIDIA GPU edge AI/ML, 165 W
Details for Helios DAS TL4 (single channel) / TX4 (dual channel) →Geokon
Vibrating wire tilt sensor
Details for Model 6350 Vibrating Wire Tiltmeter →Geokon
Vibrating wire strain gauge
Details for Vibrating wire strain gauges (Models 4000, 4100/4150/4151, 4200 series, 4200HT, 4911 rebar) →HBK
FBG interrogator, swept laser, 100 nm range, up to 8 channels, 1 S/s static or 50-1000 S/s dynamic
Details for FS22 Industrial BraggMETER optical interrogator (FS22SI / FS22DI) →James Fisher
Hull stress and fatigue monitoring (strain-based)
Details for StressAlert system →Luna
Phase-sensitive OTDR distributed acoustic sensing (DAS)
Details for iDAS intelligent Distributed Acoustic Sensor →Luna
Distributed acoustic sensing (DAS), four-laser interrogator, works on any single-mode/multi-mode/enhanced fibre
Details for ODH4+ Distributed Acoustic Sensing Interrogator →Luna
DAS interrogator: qualitative range 0-50 km, quantitative phase 0-10 km; spatial resolution 1.3-35 m; max ping rate 50 kHz
Details for ODHF Interrogator Unit →Luna
Rayleigh-backscatter high-definition fibre optic sensing (HD-FOS)
Details for ODiSI 7100 Series →Luna
Raman distributed temperature sensing
Details for ULTIMA DTS (ULTIMA-M / -L / -SM) →Nord-Lock Group
Strain gauges on the multi-jackbolt tensioner nut body measure nut dilation to give bolt preload
Details for Superbolt Load-Sensing Tensioner (LST) / Load-Sensing Flexnut (LSF) →Prysmian
Brillouin distributed temperature and strain sensing (BOTDA family)
Details for DITEST Distributed Temperature and Strain Sensing →Prysmian
Distributed acoustic sensing
Details for DIVA Distributed Vibration/Acoustic Sensing →Prysmian
Raman distributed temperature sensing, multimode fibre
Details for Omnisens Raman DTS →Sensornet
Raman DTS
Details for Halo DTS →Sensornet
Raman DTS
Details for Oryx+ DTS →Sensornet
Raman DTS
Details for Sentinel DTS →Sensuron
Distributed Rayleigh fibre optic strain, temperature and shape sensing
Details for RTS125+ Fiber Optic Distributed Strain and Temperature Measurement System →Smartec
Raman distributed temperature profiling
Details for DiTemp ATTS / DiTemp Harsh+ Raman OTDR temperature interrogators →Strainlabs
Preload sensing bolt with patented LED sensor
Details for Strainlabs System (Smart Bolts, Routers, Analytics) →VIAVI Solutions
Distributed temperature (DTS), temperature+strain (DTSS) and acoustic (DAS) fibre test heads with analytics
Details for NITRO Fiber Sensing (FTH-DTS, FTH-DTSS, FTH-DAS; OneAdvisor 800 DTS / 1000 DTSS) →Worldsensing
MEMS 3-axis tilt sensor with wireless node
Details for Loadsensing Tiltmeter (Tilt-XHP / Tilt-IR) →Worldsensing
Wireless data node for vibrating wire gauges (strain gauges, load cells, piezometers)
Details for Loadsensing Vibrating Wire Node, 1 channel (polycarbonate) →Yokogawa
Raman DTS
Details for DTSX200 Distributed Temperature Sensing System →Yokogawa
Raman DTS, single or double-ended
Details for DTSX3000 Distributed Temperature Sensor →Advanced Energy
850 nm near-IR radiometric furnace thermal imager, 60 Hz
Details for FurnaceSpection Series →Advanced Energy
Short-wavelength (750-1100 nm) thermal imager, 640x480, 60 Hz
Details for Mikron MCS640 Series →Advanced Energy
Two-wavelength infrared pyrometer reporting refractory, gas and integrated temperature
Details for Pulsar 4 / Pulsar 4 Advanced →AMETEK
LWIR-640 radiometric imaging of flare flame and pilot, 100 to 1000 °C range, with alarm thresholds in IMAGEPro V2
Details for ARC radiometric thermal imager for flare stack monitoring (LWIR-640 + IMAGEPro V2) →AMETEK
LWIR-640 thermal imager (8 to 14 µm, 640x480) in Ex d flameproof stainless housing with germanium window
Details for EXSH1 EX LWIR (LWIR-640 in flameproof housing) →AMETEK
Long-wave infrared (8 to 14 µm) radiometric thermal imager, 640x480, up to 60 Hz, integrated web server
Details for LWIR-640 →AMETEK
Mid-wave infrared thermal imager (3.9 µm filtered or 3 to 5 µm broadband), 640x480, up to 60 Hz, imaging through smoke or particulates
Details for MWIR-640 / MWIR35-640 →AMETEK
Mid-wave IR (3.9 µm) radiometric borescope, sees through flames/combustion gases, 640x480
Details for MWIR-b-640 →AMETEK
Near-IR (1 µm) radiometric borescope thermal imaging, 1968x1476 (2.9 MP), 15 fps
Details for NIR-b-2K →AMETEK
Near-IR (1 µm) radiometric borescope thermal imaging, 640x480, 15 fps
Details for NIR-b-640 →AMETEK
Near-IR (1 µm) radiometric borescope thermal imaging, 640x480, 15 fps
Details for NIR-b-640-EX →AMETEK
Near-IR (1 µm) radiometric borescope thermal imaging, 656x492, 30 fps
Details for NIR-b-656 →AMETEK
Single-wavelength (3.9 µm) infrared pyrometer for tube metal temperature, 230:1 field of view, built-in background (reflection) correction
Details for SPOT+ TMT →DIAS Infrared
Uncooled microbolometer thermal camera, 3.9 µm spectral range, 640x480, measures through flames and combustion gases
Details for PYROVIEW 640F →DIAS Infrared
Uncooled microbolometer LWIR thermal camera, 8 to 14 µm, 640x480, 50 Hz
Details for PYROVIEW 640L →Emerson
Platinum RTD pipe-clamp sensor; with X-well Technology the transmitter computes internal process temperature from surface and ambient readings
Details for Rosemount 0085 Pipe Clamp Sensor (X-well Technology) →Emerson
WirelessHART temperature transmitter; with X-well and 0085 pipe clamp gives non-intrusive process temperature from pipe surface
Details for Rosemount 648 Wireless Temperature Transmitter →Endress+Hauser
Customised thermocouple assembly measuring outer tube surface temperature in steam-cracking furnaces
Details for iTHERM ModuLine TC65 (tube skin assembly) →FSE SAFE
Cooled fixed optical gas imaging camera
Details for GV-F-3234 →FSE SAFE
Uncooled fixed optical gas imaging camera
Details for GV-F-714 →HIKMICRO
Uncooled vanadium oxide thermal module in furnace camera body, NETD 35 mK or better, 50 fps
Details for Furnace Cameras (QX310 384x288, QX610 640x512) →Honeywell
Hyperspectral IR plus visible video gas cloud imaging with AI analytics, quantifying gas type, concentration and leak size
Details for Rebellion Gas Cloud Imaging (GCI) and Mini GCI →InfraTec
Uncooled microbolometer LWIR camera 7.5 to 14 µm, 1024x768 IR pixels, accuracy ±1 °C or ±1 %
Details for VarioCAM HD head 800 →Kuva Systems
Shortwave-infrared (SWIR) imaging of methane/VOC using reflected sunlight, paired with RGB camera
Details for Kuva camera →Opgal
Fixed optical gas imaging camera with HD colour camera, 30+ gases
Details for EyeCGas FX →Optris
LWIR thermal camera 382x288, up to 80 Hz, USB 2.0 with optional GigE/PoE and process interface
Details for PI 450i LT →Optris
Uncooled LWIR (8-14 µm) thermal camera 640x480, 32 Hz
Details for PI 640i →Optris
Compact LWIR thermal camera 384x240, 8 to 14 µm, Ethernet 25 Hz
Details for Xi 410 (LT/ETH) →Pergam
Cooled optical gas imaging fixed pan-tilt camera, 24/7 monitoring
Details for GasFIR FXPT →Raythink
Uncooled OGI (7-8.5 µm, 640x512) plus 4MP visible PTZ, explosion-proof
Details for TE464G1 →Teledyne FLIR
Uncooled microbolometer thermal camera 320x240, edge analytics
Details for FLIR A400 (Smart Sensor configuration) →Teledyne FLIR
Radiometric LWIR smart sensor, A50 464x348 / A70 640x480, on-camera analytics and alarms
Details for FLIR A50 / A70 Smart Sensor →Teledyne FLIR
Uncooled microbolometer thermal camera 464x348, edge analytics
Details for FLIR A500 (Smart Sensor configuration) →Teledyne FLIR
Uncooled thermal camera 464x348 with HD visible camera, fire detection and condition monitoring
Details for FLIR A500f →Teledyne FLIR
Radiometric LWIR machine-vision camera 640x480, GigE Vision/GenICam, 50 Hz
Details for FLIR A615 →Teledyne FLIR
Uncooled microbolometer thermal camera 640x480, edge analytics (spotmeters, boxes, polygons, alarms)
Details for FLIR A700 (Smart Sensor configuration) →Teledyne FLIR
Uncooled thermal camera 640x480 with HD visible camera, fire detection and condition monitoring
Details for FLIR A700f →Teledyne FLIR
Radiometric thermal sensor 80x60 plus 640x480 visual camera, MSX imaging
Details for FLIR AX8 →Teledyne FLIR
Uncooled optical gas imaging, 320x240, LR (7-8.5 µm) or HR (9.5-12 µm) variants
Details for FLIR GF77a →Thermometrics
Contact tube-skin thermocouple (weld-pad or tubing contact), dual/duplex/multipoint
Details for Tube-Skin Weld-Pad Thermocouples →WIKA
Mineral-insulated sheathed thermocouple with patent-pending one-step contoured heat shield and weld pad
Details for TC59-T TEFRACTO-PAD tubeskin thermocouple →WIKA
Mineral-insulated tubeskin thermocouple (types K, J, E, N), grounded junction, V-shaped weld pad for full-penetration weld
Details for TC59-V V-PAD tubeskin thermocouple assembly →Workswell
Uncooled LWIR thermal camera (7.5 to 13.5 µm), 640x512 or 336x256, 30 mK sensitivity
Details for WIC Industrial →ABB
Wireless sensor on motors and pumps for vibration, temperature and other parameters with cloud analytics
Details for ABB Ability Smart Sensor →Amphenol
Piezoelectric velocity transmitter with 3 programmable frequency bands
Details for PCH420 HART-enabled 4-20 mA vibration sensor →Artesis
Sensorless electrical current and voltage analysis of motor, coupling, transmission and driven equipment
Details for e-MCM continuous motor condition monitoring →Augury
Edge-AI triaxial vibration, temperature and magnetic sensor
Details for Halo R4000 series (with Cassia X2000 gateway) →Baker Hughes
4 vibration inputs (proximitors, accelerometers, velocity) and 4 temperature inputs; local display, 4-20 mA outputs
Details for 1900/65A General Purpose Equipment Monitor →Baker Hughes
Continuous vibration monitoring and protection for small machinery
Details for 2300 Series vibration monitor (2300/20) →Baker Hughes
Rack-based API 670 machinery protection and condition monitoring (vibration, position, speed, temperature, process inputs)
Details for 3500 Machinery Protection System →Baker Hughes
Skid-mountable distributed monitoring for hydro, aero, wind, ESD and general-purpose rotating equipment
Details for 3701 ADAPT Series (Advanced Distributed Architecture Platform Technology) →Baker Hughes
General industrial motor monitoring system
Details for AnomAlert motor monitoring system →Baker Hughes
API 670 machinery protection with condition monitoring and diagnostics, up to 80 dynamic channels per System Interface Module
Details for Orbit 60 Series →Baker Hughes
Piezoelectric accelerometer, 1 or 3 axis, with temperature; velocity, acceleration, waveforms, spectra, PeakDemod
Details for Ranger Pro Wireless Vibration Sensor →Baker Hughes
Online condition monitoring: one cable hosts hundreds of permanently mounted sensors (vibration, pressure, temperature)
Details for Trendmaster Pro System →Banner Engineering
Dual-axis vibration (up to 4 kHz) with temperature; RMS velocity, high-frequency acceleration, peak velocity
Details for QM30VT2 Vibration and Temperature Sensor →Bruel & Kjaer Vibro
Rack-based machinery protection and condition monitoring: radial vibration, axial position, bearing temperature; SIL-2 certified
Details for VC-8000 SETPOINT Machinery Protection System →Emerson
API 670 machinery protection with embedded prediction (vibration, shaft position, speed, temperature, electronic overspeed)
Details for AMS 6500 ATG Online Protection System →Emerson
Wireless vibration and temperature transmitter with overall levels, spectra and waveforms
Details for AMS 9420 Wireless Vibration Transmitter →Emerson
Edge monitor mounted at the asset using Vibration CHARMs and process input CHARMs with onboard analytics
Details for AMS Asset Monitor →Emerson
Wireless vibration with PeakVue measurement and surface temperature; up to 4 waveforms
Details for AMS Wireless Vibration Monitor →Erbessd Instruments
Wireless triaxial vibration, temperature, current and RPM sensors with cloud or local analysis
Details for PHANTOM Remote Monitoring System →Everactive
Batteryless wireless sensors powered by harvested energy report vibration, temperature, magnetic field each minute
Details for Machine Health Monitoring (batteryless Eversensors + gateway + Evercloud) →Fluke Reliability
Energy-harvesting wireless screening sensor: overall vibration, temperature, humidity, top FFT peaks
Details for Fluke 3562 Screening Vibration Sensor (batteryless) →Fluke Reliability
Online synchronous multi-channel vibration monitoring (up to 20 channels incl. 4 process inputs; two measurements per second per channel) with FFT/cepstrum
Details for VibGuard IIoT →Gastops
Full-flow inductive online oil debris detection (ferromagnetic and non-ferromagnetic) with remaining useful life estimates
Details for MetalSCAN MS4000 / MS4110 →Gill Sensors & Controls
Continuous ferrous wear monitoring in oil systems
Details for WearDetect range →Hansford Sensors
Accelerometer with integral conversion to 4-20 mA proportional to velocity range
Details for HS-420 Accelerometer, 4-20 mA velocity, M12 connector →Hansford Sensors
Industrial accelerometer with 4-20 mA velocity output and 10 mV/C temperature output
Details for HS-420T Accelerometer with 4-20 mA velocity and temperature output →Honeywell
Multi-variant wireless sensor: 3-axis vibration, surface temperature, acoustics, ambient temperature, pressure, humidity
Details for Versatilis Transmitter →KCF Technologies
Wireless sensors for vibration, temperature, pressure, oil humidity and bearing friction with Base Station and SMARTdiagnostics
Details for SMARTsensing Suite →Nanoprecise
6-in-1 wireless sensor: tri-axial vibration, acoustic/ultrasonic (50 Hz-80 kHz), temperature, humidity, RPM, magnetic flux
Details for MachineDoctor (NS002-W / NS002-EB / NS003-W / NS003-LTE-W) →Petasense
Wi-Fi transmitter accepting up to three plug-in sensors (temperature, pressure, current, ultrasound, vibration)
Details for Transmitter (multi-sensor) →Petasense
Wireless triaxial vibration, temperature and running-speed detection
Details for Vibration Mote →Poseidon Systems
Inline inductive coil metallic wear debris sensing (ferrous down to 40 micron, non-ferrous 150 micron)
Details for Trident DM4500/DM4550/DM4600 Wear Debris Sensors →Poseidon Systems
Inline oil quality via electrochemical impedance spectroscopy, edge device AP2200 and Poseidon Live cloud
Details for Trident QW3100 / FQMS 2.0 Oil Quality Monitoring →Samotics
Electrical signature analysis from three-phase current and voltage at the motor control cabinet; no sensors on machine
Details for SAM4 Platform →Schaeffler
Battery-powered wireless vibration/temperature sensors (7 KPIs incl. 6 vibration readings + temperature), cellular gateway and app
Details for OPTIME wireless condition monitoring system →Siemens
PLC-based condition monitoring: 4 IEPE accelerometers and 1 speed sensor per SM 1281 module, parameter and frequency-selective analysis
Details for SIPLUS CMS1200 (SM 1281 Condition Monitoring Module) →Siemens
Wireless 3-axis vibration, temperature and magnetic field sensor
Details for SITRANS MS200 Multisensor →SKF
Online vibration monitoring unit, 16 analogue and 4 digital inputs, simultaneous sampling
Details for Multilog On-line System IMx-16Plus →SKF
On-line vibration monitoring unit: 8 analogue inputs (typically accelerometers) + 2 tacho inputs, SKF enveloping filters
Details for SKF Multilog On-line System IMx-8 / IMx-8Plus →Tan Delta Systems
Real-time electro-chemical oil analysis (FSH technology) detecting water, acid, fuel, viscosity, soot and particles
Details for OQSx-G2 Oil Quality Sensor →Tan Delta Systems
Scalable IoT oil condition monitoring kit using FSH technology
Details for SENSE-3 IoT Kit →Tractian
Wireless vibration/temperature sensor, Ex-certified
Details for Smart Trac Ex →Tractian
Wireless triaxial vibration (0-32 kHz), temperature, hour meter, RPM sensor with Smart Receiver gateway
Details for Smart Trac UG1 (Smart Trac UG2 also listed) →Waites
Tri-axial high-g accelerometer (X +/-50 g Fmax 11.2 kHz; Y,Z +/-64 g Fmax 5.2 kHz) with wake-on-shake and ImpactVue
Details for SM7-1150 Sensor Mote →Yokogawa
Compact wireless sensor measuring X/Y/Z vibration and surface temperature
Details for XS770A Wireless Vibration Sensor →Acoustic Systems Inc.
Acoustic transient wave detection with GPS time-synchronised site processors and MasterComm
Details for WaveAlert Acoustic Leak Detection System (ALDS) →Armstrong International
Steam-trap-specific acoustic plus temperature sensing via patented waveguide
Details for AIM ST5700 Series (WirelessHART) →Armstrong International
Steam-trap-specific acoustic plus temperature sensing via patented waveguide
Details for AIM ST6700 Series (ISA100 Wireless) →Atmos International
Statistical volume balance (SPRT) using pressure and flow data
Details for Atmos Pipe →Atmos International
Negative pressure wave detection with fast-response pressure meters
Details for Atmos Wave →Emerson
Valve position/lift monitoring to track relief events and release
Details for Fisher FIELDVUE 4400 Digital Position Transmitter (PRV monitoring) →Emerson
Ultrasonic acoustic event detection (ultrasonic sensor peak sensitivity 35-45 kHz) plus thermocouple
Details for Rosemount 708 Wireless Acoustic Transmitter →Emerson
Ultrasonic acoustic detection (25-100 kHz) with four piezoceramic sensor heads
Details for Rosemount Incus Ultrasonic Gas Leak Detector →Everactive
Batteryless energy-harvesting sensor reporting condensate, steam and ambient temperature, analysed in cloud
Details for Everactive Steam Trap Monitoring (Eversensor, Evergateway, Evernet) →Honeywell
Ultrasonic gas leak detection, 18-70 kHz tuned piezoelectric, 40-140 dB detectable SPL, spectral analysis
Details for Searchzone Sonik Ultrasonic Gas Leak Detector →IMI
Wireless acoustic (15-80 kHz sound pressure) plus temperature sensor
Details for NEON Sonic sensor →KROHNE
Extended Real Time Transient Modelling (E-RTTM) with leak pattern recognition
Details for PipePatrol Leak Detection System →KROHNE
Hydraulic modelling with AI statistical pattern recognition on flow, pressure and temperature
Details for PipePatrol NEO (Neural Engine Pipeline Monitoring) →MISTRAS Group
Acoustic emission monitoring of background-noise changes to detect, locate and trend boiler/HRSG tube leaks
Details for Acoustic Monitoring System (AMS) - HRSG Leak Detector →MSA Safety
Ultrasonic acoustic detection (above 12 kHz) with artificial neural network noise discrimination
Details for Gassonic Observer-i Ultrasonic Gas Leak Detector →Spirax Sarco
Clamp-on trap monitoring (head unit with central receiver and STAPS software)
Details for STAPS Wireless Steam Trap Monitor →Yokogawa
Temperature sensor plus acoustic sensor
Details for Sushi Sensor wireless steam trap monitoring device →Camlin Energy
Partial discharge monitoring in bushings with noise rejection and PD triangle visualisation
Details for TOTUS BM Bushing Monitor →Camlin Energy
Dissolved hydrogen and moisture-in-oil monitoring with thermal, moisture and ageing analytics
Details for TOTUS G1 Hydrogen Monitor →Camlin Energy
Photo-acoustic spectroscopy (PAS): hydrogen, methane, ethylene, acetylene, carbon monoxide plus moisture
Details for TOTUS G5 DGA Monitor →Camlin Energy
DGA profile of up to nine gases plus moisture; optional PD, bushing monitoring, through-fault current and analytics
Details for TOTUS G9 Transformer Monitor →Camlin Energy
Tap-changer monitoring of switching operations, motor current, torque and temperature to detect mechanical and electrical wear
Details for TOTUS OLTC Monitor →Doble Engineering
Online hydrogen, moisture and carbon monoxide detection
Details for Calisto 2 →Doble Engineering
Gas chromatography: hydrogen, carbon monoxide, methane, acetylene, ethylene plus moisture
Details for Calisto 5 →Doble Engineering
Infrared DGA: nine gases plus moisture, membrane extraction, water-vapour auto-calibration (no gas cylinders)
Details for Calisto R9 →Doble Engineering
RF emission PD analysis in HF, VHF and lower UHF bands; works with antennas, CTs, UHF drain-valve probes, bushing tap connectors
Details for doblePRIME PD-Guard Partial Discharge Monitor →Eaton
Permanently installed infrared sensors on busbar joints; EM sensors on cable terminations
Details for Exertherm Continuous Thermal Monitoring (MV switchgear) →GE Vernova
Photo-acoustic spectroscopy (PAS) DGA, nine gases plus moisture in oil (4th generation)
Details for Kelman DGA 900 →GE Vernova
PAS DGA, nine gases plus moisture, discrete monitoring of three adjacent single-phase transformers from one monitor
Details for Kelman DGA 900 MULTITRANS →GE Vernova
PAS DGA (nine gases plus moisture), expandable with thermal, cooling, bushing and OLTC add-on packs
Details for Kelman DGA 900 PLUS →GE Vernova
PAS DGA, nine gases, for main tank, selector tank and OLTC diverter tank (up to 3 tanks)
Details for Kelman DGA 900 TAPTRANS →GE Vernova
Photo-acoustic DGA: hydrogen, acetylene, carbon monoxide plus moisture in oil
Details for Kelman MINITRANS →GE Vernova
Photo-acoustic DGA, nine gases plus moisture in oil, no consumables or calibration gases
Details for Kelman TRANSFIX →Hitachi Energy
Solid-state (membrane-free) hydrogen sensor plus moisture in oil, active oil sampling, no moving parts
Details for TXpert Ready DGA sensor CoreSense →Hitachi Energy
FTIR spectrometer DGA: nine gases plus moisture; no consumables, carrier or calibration gas
Details for TXpert Ready multi-gas DGA analyzer CoreSense M10 →Monitra
24/7 PD monitoring with HFCT, HVCC, TEV, UHF, acoustic, bushing-tap sensors; machine-learning denoising
Details for Kronos Monitor →Prysmian
Permanent PD and spot-temperature monitoring with Wings sensors; 200 MS/s, 50 MHz
Details for Pry-Cam Grids →Qualitrol
Capacitive sensor air-gap monitoring between rotor and stator, 4-16 sensors
Details for AGTracII →Qualitrol
Fibre-optic accelerometer end-winding vibration, up to 25 channels
Details for EVTracII →Qualitrol
Continuous rotor flux monitoring to detect shorted rotor turns
Details for FluxTracII-R 4208 →Qualitrol
Multi-technology monitor: PD, rotor magnetic flux (shorted turns), stator end-winding vibration, shaft voltage/current
Details for GuardII+ →Qualitrol
Continuous PD monitoring of isolated phase bus and busduct via 80 pF epoxy-mica capacitors
Details for GuardII+ 4208 IPB →Qualitrol
Low-frequency PD monitoring with up to four 1 nF capacitive couplers
Details for MICAMAXX →Qualitrol
Continuous online PD monitoring via one 80 pF epoxy-mica capacitor per phase, with noise separation
Details for PDTracII 4208 →Schneider Electric
Wireless thermal sensor for continuous condition monitoring of connections
Details for Easergy TH110 / PowerLogic Thermal Tag TH110 →Vaisala
In-situ hydrogen, moisture-in-oil and oil temperature measurement, no pumps or membranes
Details for Moisture, Hydrogen and Temperature Transmitter MHT410 →Vaisala
Vacuum gas extraction with IR, nine gases plus total gas pressure (optional O2+N2); no consumables
Details for Optimus DGA Monitor OPT100 →BARTEC
Zone 1 flameproof enclosure for access points, radios and gateways
Details for EXgate360 →BARTEC
Zone 1 / Div 1 wireless enclosure system with intrinsically safe antenna isolators
Details for iWAP 107 →Bentley Systems
Risk-based inspection and degradation-rate analysis for pressure systems and tanks; RCM2/FMEA; next-due inspection dates
Details for AssetWise Reliability →Cenosco
Integrity management software: corrosion calculations, corrosion loops, operating windows, historian integration
Details for IMS PEI (Pressure Equipment Integrity) →Cosasco
Corrosion data management/analytics software
Details for Cosasco Data Online (CDO) →Cosasco
Corrosion monitoring data management server (LPR, Microcor, pitting, galvanic, erosion, CP)
Details for Integrated Corrosion Management System ICMS (ICMS3) →Cosasco
WirelessHART 7 mesh repeater (2.4 GHz DSSS) extending Microcor wireless ER transmitter network
Details for Wireless Extender MWT-3905-WE →Eddyfi Technologies
Cloud (or on-premise) data management software for ultrasonic corrosion/erosion monitoring
Details for webPIMS →Emerson
WirelessHART gateway with remote antenna
Details for Emerson Wireless 1410D Gateway with 781 Field Link →Emerson
Analytics software for inline (intrusive probe) corrosion data
Details for Plantweb Insight Inline Corrosion App →Emerson
Wireless network health and diagnostics software
Details for Plantweb Insight Network Management App →Emerson
Analytics/visualisation software (dashboards, metal-loss heat maps) for Rosemount Wireless Permasense ultrasonic data
Details for Plantweb Insight Non-Intrusive Corrosion Application →Emerson
IIoT analytics software monitoring pressure relief valve and device releases (count, duration, production and emissions loss)
Details for Plantweb Insight Pressure Relief Valve Application →Emerson
IIoT analytics software for steam trap status: inactive, blow-through, plugged, flooded, with economic and emissions impact
Details for Plantweb Insight Steam Trap Application →Emerson
WirelessHART/ISA100 gateway
Details for Rosemount 1410S Wireless Gateway →GE Vernova
Risk-based inspection (API RBI 580/581), thickness-reading storage, corrosion-rate analysis and retirement-date prediction, integrity operating windows
Details for APM Mechanical Integrity (Asset Integrity Management) →Honeywell
Predictive corrosion models correlating rates to process unit, damage mechanism and operating conditions
Details for Honeywell Corrosion Advisor →Honeywell
Meshing access point for ISA100 Wireless (IEC 62734) and WirelessHART (IEC 62591) field instruments
Details for OneWireless Field Device Access Point (FDAP2 / FDAP32 Gen 3) →Honeywell
ISA100 Wireless and WirelessHART meshing access point, PoE only
Details for OneWireless Field Device Access Point Gen3 Plus (FDAP3P) →Honeywell
ISA100 Wireless / WirelessHART / LoRaWAN system manager, security manager and gateway
Details for OneWireless Wireless Device Manager (WDM) →Pepperl+Fuchs
WirelessHART to Modbus/HART gateway
Details for WHA-GW-F2D2-0-AS-Z2-ETH WirelessHART Gateway →Tektelic
16-channel LoRaWAN gateway
Details for KONA Macro Ex IoT Gateway →Yokogawa
ISA100.11a system manager, security manager and gateway
Details for YFGW410 Field Wireless Management Station →Yokogawa
ISA100.11a backbone router/access point (IEEE 802.15.4, 2.4 GHz, AES-128) with Duocast redundancy
Details for YFGW520 Field Wireless Access Point →Download catalogue.csv (334 products incl. 13 discontinued)